Flow structure in a flat vortex chamber

We investigate a flow in a flat vortex chamber in which the distance between the end walls is smaller than the radius of the chamber. The study was mainly performed by optical methods: a Töpler device was employed, with the Foucault knife replaced by a diaphragm. It is shown that the flow in the chamber has a complicated spatial structure. In addition to the basic helical flow, an intense “transverse” rotation of the type of Taylor-Görtler vortices occurs. In contrast to previously studied flows, where these vortices were observed near a concave surface, in the motion considered transverse vortices occur in the entire working volume of the chamber. In this case, four parallel vortex filaments are formed. The high intensity of the vortices has allowed one to visualize them by the Töpler method and by “tinting” the flow by highly disperse particles. Quantitative dependences of the dimensions of the vortex cells on the flow regime, i.e., on the pressure of gas deceleration, were obtained.     

Deep field noise in holographic particle image velocimetry (HPIV): numerical and experimental particle image field modelling

 Holographic recording overcomes the limits in 2-D particle image velocimetry (PIV) to cover a 3-D flow field volume. Interrogation by focusing on single planes in a reconstructed particle field is disturbed by noise from out-of-focus particles. A numerical simulation models image reconstruction and shows how validation rates depend on aperture and volume depth. An experimental model environment of scattering particles in moveable plastic slices gives support to the numerical results. Simulations and tests are carried out for interrogation by autocorrelation and crosscorrelation techniques and furnish guidelines for system design. Received: 27 December 1996 / Accepted: 14 August 1997     

Effect of the loading rate, angle of orientation of fibers, and temperature on the strength properties of birch

The present paper reports results of analysis of the strength and strain properties of birth wood at different loading rates, sample temperatures, and angles of orientation of fibers relative to the direction of loading. Dynamic tests (v=10 m/sec) with axial compression of the samples were conducted by the Kol'skii method on a setup with a Hopkinson compound rod. Noticeable dynamic strengthening of samples with angles of orientation of fibers α=0 and 5° was observed. At test temperatures +65, +20, and −30°C, the dynamic strength is higher than the quasistatic strength by approximately 23, 31, and 42% respectively. Institute of Experimental Physics, Sarov 607190. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 39, No. 6, pp. 154–158, November–December, 1998.     

Numerical study of boundary layer transition in flowing film evaporation on horizontal elliptical cylinder

A numerical study of the onset of longitudinal transition between turbulent and laminar regimes during the evaporation of a water film is presented. These water film streams along a horizontal elliptical tube under the simultaneous effects of gravity, pressure gradients, caused by the vapor flow and curvature, and viscous forces. At the interface of water vapor, the shear stress is supposed to be negligible. Outside the boundary layer, the vapor phase velocity is obtained from potential flow. In the analysis Von Karmans turbulence model is used and the inertia and convection terms are retained. Transfers equations are discretised by using the implicit Keller method. The effects of an initial liquid flow rate per unit of length, Froude number, temperature difference between the wall and the liquid–vapor interface and ellipticity on the transition position have been evaluated. The transition criterion has been given in term of the critical film Reynolds number (Re)_C.     

Dynamics of hybrid shafts

In this paper the dynamic performance and cross-section deformation of shafts made of metals (steel and aluminum), composites (CFRP and GFRP) and hybrids of metals and composites have been studied. A layered finite degenerated shell element with transverse shear deformation and dynamic behavior is employed. Results obtained show that improvements in dynamic performance and reduction of cross-section deformation of hybrid shafts over metallic and composite shafts are possible.     

Stochastic analysis of a displacement front in a randomly heterogeneous medium

The behavior of the interface in a two-phase immiscible fluid flow in a randomly heterogeneous porous medium is investigated. The medium is described by the permeability distribution which represents a random field with given statistical characteristics. When the approach proposed is used, it turns out to be possible to relate the statistical characteristics of the interface with the statistical characteristics of the permeability field and the properties of the phases. On the basis of this relation an important characteristic of the two-phase flow, namely, the average saturation distribution in the neighborhood of the interface, can be calculated.     

Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases

Transformation plasticity in steels (i.e., the anomalous plastic flow observed during the progress of a phase transformation) is usually attributed to two distinct physical mechanisms, which have been proposed by Greenwood and Johnson and Magee. This paper proposes a theoretical approach to the problem, in the case where the Magee mechanism is negligible and the phases are ideal-plastic. An explicit expression for the transformation plastic strain rate is obtained for a steel undergoing a transformation under a small applied stress; this expression is consistent with experiments conducted on various materials. A finite element simulation provides a confirmation of the theoretical formula and allows for a detailed examination of the validity of some physical hypotheses made in the treatment. It also allows for a study of transformation plasticity under high applied stresses. Based on these results, a general (i.e., applicable for all kinds of stresses applied) model is proposed in the case of ideal-plastic phases.     

A numerical study of riblet effects on laminar flow through a plane channel

Numerical computations are reported of fully-developed flow through plane channels with knife-edge riblets. The study has covered riblet height: spacing ratios from 0.5 to 3 and riblet heights ranging from 0.1%–4.0% of the distance between the channel walls. In no case did results indicate a reduction in drag compared with the case of a smooth channel, a result that is in contrast with earlier studies. It is suggested that apparent drag reductions reported earlier in laminar flow may have arisen from the use of an insufficiently fine grid.     

Density distribution in rarefied gas flow behind a perforated plate

The relative density distribution in the rarefied CO₂ flow field behind a perforated plate has been experimentally investigated on the range of Knudsen numbers 10^–3 Kn 10^–1. The results of these experiments serve to demonstrate the validity of using the molecular velocity distribution function for determining the relative density on the Knudsen number interval in question. This distribution function was previously employed for calculating the parameters in molecular beams formed by capillary sieves in the free-molecular flow regime [1].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 183–184, May–June, 1989.     

Global Existence of Smooth Solutions for Partially Dissipative Hyperbolic Systems with a Convex Entropy

We consider the Cauchy problem for a general one-dimensional n×n hyperbolic symmetrizable system of balance laws. It is well known that, in many physical examples, for instance for the isentropic Euler system with damping, the dissipation due to the source term may prevent the shock formation, at least for smooth and small initial data. Our main goal is to find a set of general and realistic sufficient conditions to guarantee the global existence of smooth solutions, and possibly to investigate their asymptotic behavior. For systems which are entropy dissipative, a quite natural generalization of the Kawashima condition for hyperbolic-parabolic systems can be given. In this paper, we first propose a general framework for this kind of problem, by using the so-called entropy variables. Then we go on to prove some general statements about the global existence of smooth solutions, under different sets of conditions. In particular, the present approach is suitable for dealing with most of the physical examples of systems with a relaxation extension. Our main tools will be some refined energy estimates and the use of a suitable version of the Kawashima condition.